{"id":447,"date":"2021-04-30T11:22:17","date_gmt":"2021-04-30T16:22:17","guid":{"rendered":"http:\/\/laiben.com\/wordpress1\/?page_id=447"},"modified":"2025-05-21T11:12:08","modified_gmt":"2025-05-21T16:12:08","slug":"ferry-boat","status":"publish","type":"page","link":"http:\/\/laiben.com\/wordpress1\/ferry-boat\/","title":{"rendered":"Ferry Boat"},"content":{"rendered":"\n

Prototype…<\/strong><\/p>\n\n\n\n

The SS<\/em> Ste. Genevieve<\/em> was built in 1922 by the Charles Ward Engineering Works at Charleston, W.Va. The side wheeler’s six coal-fired boilers powered 28′ paddle wheels. The hull measured 286\u2032 x 86\u2032, capable of carrying 18 railcars on three parallel tracks and could even haul a 160 ton locomotive on its center track. The superstructure was covered in galvanized steel, later painted white over red.<\/p>\n\n\n\n

Archival film from the 1950’s is available on YouTube<\/strong><\/a> showing the Ste. Genevieve<\/em> in action on both sides of the river (Thomure, MO and Kellogg, IL). The Ste. Genevieve<\/em> clip is one minute in length and begins at the 11 minute 32 second mark.<\/p>\n\n\n

\n
\"\"\n\t\t\t\n\t\t\t\t\n\t\t\t<\/svg>\n\t\t<\/button>
Builder’s photo of the
SS Ste Genevieve<\/em> in 1922.<\/figcaption><\/figure>\n<\/div>\n\n
\n
\"\"\n\t\t\t\n\t\t\t\t\n\t\t\t<\/svg>\n\t\t<\/button>
Builder’s photo of the
SS Ste Genevieve<\/em> in 1922.<\/figcaption><\/figure>\n<\/div>\n\n
\n
\"\"\n\t\t\t\n\t\t\t\t\n\t\t\t<\/svg>\n\t\t<\/button>
The
 SS Ste. Genevieve<\/em> docked at Thomure. Perspective is standing on the apron immediately after pulling a cut of cars from the left track. Photo credit unknown.<\/figcaption><\/figure>\n<\/div>\n\n\n

Modeling the ferry boat…<\/h2>\n\n\n\n

The Ste. Genevieve<\/em> model must be scaled down to fit the space – the hull, built from \u00be” Birch plywood, has been shortened to 209 scale feet and width is just 4′ shy of the prototype at 82′. Despite the reduction in size, the model should be a prominent landmark on the layout, measuring 52″ x 20″ and holding 12 railcars on its deck.<\/p>\n\n\n

\n
\"\"\n\t\t\t\n\t\t\t\t\n\t\t\t<\/svg>\n\t\t<\/button>
The basic hull started with a sheet of plywood. The sides were built up with a strip of plywood and will be covered with .020″ styrene.<\/figcaption><\/figure>\n<\/div>\n\n
\n
\"\"\n\t\t\t\n\t\t\t\t\n\t\t\t<\/svg>\n\t\t<\/button>
The bow was shaped to a gentle curve with Bondo added to smooth the contour.<\/figcaption><\/figure>\n<\/div>\n\n\n

The deck extends past the edge of the hull and is fashioned from \u00bc” Birch plywood. The surface was filled and then prepped with Rustoleum gray primer followed by two coats of Rustoleum Camo Brown (all rattle can). Given its size, there was no way to airbrush the hull in the spray booth.<\/p>\n\n\n

\n
\"\"\n\t\t\t\n\t\t\t\t\n\t\t\t<\/svg>\n\t\t<\/button>
The edges of the decking were rounded to simulate the steel on the prototype.<\/figcaption><\/figure>\n<\/div>\n\n\n

The boat will “float” in the river on rubber wheeled casters, allowing for ease of maneuverability and docking at the incline. The deck sits 10 scale feet above the waterline.<\/p>\n\n\n\n

Code 100 nickel silver rail from Right-O-Way was spiked onto 12″x12″ scale timbers. The spikes were inserted at a very acute angle to prevent them from bottoming out on the plywood deck.<\/p>\n\n\n

\n
\"\"\n\t\t\t\n\t\t\t\t\n\t\t\t<\/svg>\n\t\t<\/button>
The Mississippi River benchwork sits about 4″ below the rest of the layout.<\/figcaption><\/figure>\n<\/div>\n\n
\n
\"\"\n\t\t\t\n\t\t\t\t\n\t\t\t<\/svg>\n\t\t<\/button>
Each of the 3 tracks have a styrene “key” to aid in aligning the boat to the incline apron.<\/figcaption><\/figure>\n<\/div>\n\n\n

Before continuing with building of the hull and superstructure, docking has to be tested. Hence, the next phase of construction was the river bank and the incline. The benchwork was installed and the incline trestle was built from Mt. Albert Scale Lumber<\/strong><\/a>. The portion (apron) which makes contact with the boat was formed from styrene.<\/p>\n\n\n

\n
\"\"\n\t\t\t\n\t\t\t\t\n\t\t\t<\/svg>\n\t\t<\/button>
Mississippi River bank and incline where the ferry boat lands.<\/figcaption><\/figure>\n<\/div>\n\n
\n
\"\"\n\t\t\t\n\t\t\t\t\n\t\t\t<\/svg>\n\t\t<\/button>
The superstructure coming together – fabricated with Evergreen styrene.<\/figcaption><\/figure>\n<\/div>\n\n
\n
\"\"\n\t\t\t\n\t\t\t\t\n\t\t\t<\/svg>\n\t\t<\/button>
The completed
Ste Genevieve II<\/em> ferry boat in place at the end of the Thomure incline.<\/figcaption><\/figure>\n<\/div>\n\n
\n
\"\"\n\t\t\t\n\t\t\t\t\n\t\t\t<\/svg>\n\t\t<\/button>
MP #1817 4-8-0 and idler car M-I #1600 just dropped off 2 gons of coal after the final trip on Saturday. Tomorrow, a few crew members will hand shovel the coal into the boat’s coal bunkers.<\/figcaption><\/figure>\n<\/div>\n\n
\n
\"\"\n\t\t\t\n\t\t\t\t\n\t\t\t<\/svg>\n\t\t<\/button>
MP #1817 places a cut of loads onto the center track.<\/figcaption><\/figure>\n<\/div>\n\n\n

<\/p>\n","protected":false},"excerpt":{"rendered":"

Prototype… The SS Ste. Genevieve was built in 1922 by the Charles Ward Engineering Works at Charleston, W.Va. The side wheeler’s six coal-fired boilers powered 28′ paddle wheels. The hull measured 286\u2032 x 86\u2032, capable of carrying 18 railcars on … Continue reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-447","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"http:\/\/laiben.com\/wordpress1\/wp-json\/wp\/v2\/pages\/447","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/laiben.com\/wordpress1\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/laiben.com\/wordpress1\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/laiben.com\/wordpress1\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/laiben.com\/wordpress1\/wp-json\/wp\/v2\/comments?post=447"}],"version-history":[{"count":35,"href":"http:\/\/laiben.com\/wordpress1\/wp-json\/wp\/v2\/pages\/447\/revisions"}],"predecessor-version":[{"id":1854,"href":"http:\/\/laiben.com\/wordpress1\/wp-json\/wp\/v2\/pages\/447\/revisions\/1854"}],"wp:attachment":[{"href":"http:\/\/laiben.com\/wordpress1\/wp-json\/wp\/v2\/media?parent=447"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}